View DvR Routes

About this task

View the DvR routes (host routes and the IPv4 network routes) that are learned on a DvR Controller or a Leaf node.

Controllers display all the IP subnet routes configured for that DvR domain. Leaf nodes display the IP subnet routes learned from the Controller(s) for the Layer 2 VSNs in the DvR Domain. Leaf nodes also display any redistributed routes into the DvR Domain that are learned from the Controllers (direct routes, static routes and the default route).

Before you begin

Ensure that you enable DvR globally on the node.

Procedure

  1. In the navigation pane, expand Configuration > Fabric.
  2. Select DVR.
  3. Select the Routes tab.
  4. Optional: To filter the rows based on the specific criteria, select Filter.

Routes Field Descriptions

Use the data in the following table to use the Routes tab.

Name

Description

DestIpAddrType

Specifies the IPv4 destination address type of the DvR route.

DestIpAddr

Specifies the IPv4 destination address of the DvR route.

DestMask

Specifies the destination mask of the DvR route.

L3Isid

Specifies the Layer 3 I-SID of the DvR route.

EcmpIndex

Specifies the ECMP index for the ECMP routes of the DvR route.

NextHopMac

Specifies the MAC address of the next hop BEB in the DvR route.

L2Isid

Specifies the Layer 2 I-SID of the DvR route.

VrfId

Specifies the VRF ID.

Cost

Specifies the SPB cost of the DvR route.

NextHopName

Specifies the host name of the next hop BEB, in the DvR route.

Type

Specifies the route type of the DvR route.